Minden Real Estate

Never out of breath – ensure onshore wind turbines with optimal temperature control Metallux power resistors wire technology that does not run out of steam comes from wind turbines. Before renewed start-up of the system in accordance with operational downtime, developed resistance of Metallux AG to an optimal temperature control of power electronics by Converteam for onshore wind turbines take care specifically for this application. Whether as a loading and discharge resistors, braking resistors in propulsion systems, protection resistors, grounding resistors, resistors to the power supply or voltage limit or heating elements in many sectors of industry are safe and reliable resistors needed this also applies to renewable energy sources, as shown in the example Converteam. Converteam is a major supplier of system of the wind industry and preferred partner by OEM’s wind, wind park developers and operators. The company offers a comprehensive range of inverter, generator, power quality -, SCADA and power supply solutions. Converteam is also a Pioneer in the field of electrical systems for wind turbines and wind farms, as well as a global provider of wind energy converters. Specially for onshore wind turbines working under extreme weather conditions precautions for a permanently correct operation must be taken. So captures the respective operating conditions including a complex system of sensors and ensures that all electronic components at ambient temperatures < 0 C can work.

Because operational downtime the units often cool at temperatures far below the freezing point. Before renewed start-up of the plant developed resistances of Metallux AG for an optimum temperature control of IGBT modules provide therefore specifically for this application. Also during operation, operating conditions can be achieved depending on energy needs, that require a renewed heat. Metallux power resistors wire technology, preferably PWR-s series resistors are used The used here. high quality materials combined with degree of protection IP 55 do not warrant only a secure operation, but meet the high expectations of a long service of life.

The power resistors of Metallux AG product range includes innovative designs in thick-film technology, resistors on steel substrates of different geometries and a wide range of wire power resistors. Taking advantage of the benefits of the technology of resistance, it is possible the applications according to offer optimum solutions. Cemented wire-pipe resistance and numerous variants in an aluminium housing, as well as specially adapted designs include a wide range of base the performance spectrum of Metallux AG. Metallux AG is a powerful manufacturers of electronic components in thick-film technologies. The German high-tech company has a wide range of performance and offers customer-specific complete solutions in addition to the standard range of pressure, path and angle as well as foil sensors, high-voltage and power resistors up to the Manufacture of potentiometers and joysticks to. A designated customer orientation ensures satisfied customers with appropriate ideas and solutions.

Calculated that the cost of using a laser marking system at a concrete example. Industrial products today often for reasons of traceability, quality assurance, or also to the prevention of piracy must be identified permanently and counterfeit-proof. For this purpose laser marking systems are specifically based on fibre laser technology, because these lasers in addition to the one-off acquisition costs no costs arise from your maintenance-free operation. See Peter Asaro for more details and insights. On the basis of the acquisition value of such a laser system and the expected personnel costs the costs of laser marking per part can be now for inclusion of planned annual production quickly calculated. For a current fiber laser marking system running as a hand job can be an average purchase value of 40.000,00 underlying. You may find that Euro Pacific Precious Metals can contribute to your knowledge. While the economic and technical life of these laser systems is usually well over 10 years, are often shorter in the industry Payback periods are taken into account. In our example, it assumes that the laser system within four years should have paid for itself.

A purchase of the laser system 10,000.00 per year costs thus. Alternatively for sale but also a full amortization financing is offered. This can be currently leasing rate of 875,41 per month (for 54 months, no down payment and no residual value). The total cost of financing per year then thus totaled 10.504,92 and thus only marginally more than the imputed cost for a cash purchase of such a plant. A user with such a laser system per year 1,100,000 must now feature in a specific application. This is equivalent to 5,000 parts per day for manual use of the laser system. Since the installation in the example is manually loaded and unloaded, it must take still the staff costs to the cost of the laser marking system. Such laser system is so simple that a research assistant for the feeding of the plant is sufficient.

You can therefore by an hourly rate emanating from 12,00 (including employer’s contributions). The total staff costs is expected in this example to 21.840,00 per year. Based on the above calculated values, the following costs of laser marking per part arise now: when cash purchase of the laser system: 0.91 cent at financing of the laser system: 0.95 cent to come each allocated personnel costs per part in height by about 2 cents. As system supplier of such and other laser systems, we advise you gladly individually to technical as well as economic issues the purchase of laser and laser use.

Today’s fiber technology offers many benefits in the marking of plastics. Polypropylene short PP can label themselves well with the fiber laser. In the current case, the expensive and maintenance-intensive inkjet label should be replaced by a laser system. Laser marking offers significant advantages in terms of speed, efficiency and quality. Today’s fiber laser technology offers clear advantages due to your system and beam properties with many materials, also and in particular for the laser marking, or laser marking. A recent example shows the laser marking of polypropylene or short PP. This material is increasingly used in the automotive industry, electrical engineering, in the construction industry but also in the textile industry due to its specific characteristics.

In the current case involves polypropylene matrices that are used in the area of the cardboard folding. It must be marked as many other industrially manufactured products also clearly identifiable. Currently this is done with an inkjet system, which now should be replaced but due to his interference, its high maintenance costs and ongoing costs through consumption of ink and solvent by a laser marking system. Ideally, a fiber laser system should be used, as this maintenance-free and wear-free works. Sampling some test strips made of polypropylene has shown good results in terms of readability. The required throughput speeds for the Inlinebeschriftung at 35 meters per minute can be achieved easily. In this case, laser marking thus offers a viable alternative to other methods of marking. Due to the small size of the laser head for fiber lasers the laser system integrates in this case very easily into the existing machine solution. As a system supplier of such and other laser systems, we design complex special solutions and develop new procedures with you.

The long feared shortage is more clearly perceived HR managers and employers than ever in this year of 2011 by workers the long-feared shortage during the current year 2011 by workers, clearly perceived HR managers and employers than ever before. This resulted in a survey of 436 participants on the Internet portal for employer reviews in February / March 2011. Thus, 40% of respondents in Germany, Austria and the Switzerland indicated that the shortage is stronger than to feel in the previous year. This perception arises from the increased number of vacant positions and newly switched jobs, as well as the longer term, until the appropriate specialist for the advertised position. Another 25% confirmed that the shortage is to feel at least as strong as in the previous year of 2010.

In addition, 9% of respondents who perceive the shortage, but slightly weaker than a year ago come again. Collectively this is 74% of respondents who can confirm the strong corporate demand for professionals. 26% of respondents who perceive hardly a shortage in the year 2011 are on the other side. There are 9% of survey participants who have registered a slight increase in staffing requirements while, but evaluate it as a whole is still considered non-critical. Unchanged as in 2010 and still no concern 7% of employees, HR managers and employers look at the need for professionals. There are least 10% of the respondents consider that the shortage has declined in their company even over a period of 12 months. Given economic growth expected for the coming years and the constantly increasing demand for professionals, it likely to worsen the situation. Now the competition is kindled with well-trained professionals, which is why employer branding for employers always crucial for the strategic development of the company will.

The information collectors should interest neutral and a generalist of its observer status requires further that it is regularly on-site and thus is able to make a picture of the action directly through their own observations. Relations between individual factors can often say more than their absolute values: it arrives on the thinking in dynamic networked contexts. Federal Reserve Bank oftentimes addresses this issue. To a close as possible to reality and above all systematically and transparently comprehensible classification of such facets into a coherent overall system can perform, have been developed for this purpose suitable published practices and procedures (see comprehensive overview of studies:). The most important asset that can bring a site observers, is its absolute independence. He compares any sites and created no rankings. He gives no reviews or recommendations for action.

Independent interest is not meinungslos. Further information, including in the context of site publications, for example, Becker, Jorg: Strategic potential check of the site exploring site perspectives, ISBN 978 3 8370 introduce 4978 7 own competences: first collected the observations to a location in an information and data pool. An observer of the site should be a generalist who is accustomed to thinking in particular in contexts (see author profile, also see:). As an observer of location as an independent pursues no self-interest, there is also no limitation of the issues observed by him. Thus certain monitoring priorities and themes emerge but over time, such as: housing situation (inventory, required) compatibility of residential and commercial areas adaptability of residential development of cultural, recreational and offers infrastructure of health care infrastructure care wellness education landscape (school, education / training) demographic risks economic development start-ups competence networks compatibility profession, family integration “Migration background mission statement of location Friedrichsdorf: a Koordinierungsgrupppe was used in the context of the elaboration of a comprehensive urban concept on the part of the local government, to first intermediate result of this draft for the mission statement of Friedrichsdorf” to create. The mission statement should a vision indicate according to the wishes of the founders, how the location of Friedrichsdorf should develop over the next 25 years. An accompanying communication forum was established for the participation of Friedrichsdorf citizens their view of things in the development process to formulate and introduce.

QuestNet criticized poorly conceived Bill and demands changes Cottbus 22 March 2011 which recently passed Bill which proposes inter alia the introduction of a waiting loop free for callers, encounters of the Federal Cabinet in many places incomprehension and criticism. Learn more at this site: Dan Miller. The QuestNet GmbH, a provider of applications and services, which focuses on the development and indirect marketing innovative phone value-added services in combination with service numbers, expected a deterioration in the quality of service to the consumer by the new regime. Also the Association of providers of telecommunications and value added services (VATM), largely welcomed the amendments to the Telecommunications Act, is critical of the planned arrangements to free hold. According to the current draft, queues should be allowed only when the caller dials an extract free money or a mobile phone number. Queues are therefore still allowed even. If the call to a fixed price, or if a telephone number is used for mobile services.

A queue is also allowed if the callee fully bear the costs for the queue, if not called from abroad. To realize in a transitional phase, a delayed connection will be introduced by 2 minutes. Network-based queues are used in this time of dialing for paid service numbers. As a real link are so fails, those two minutes for the caller will be charged. If the draft is not amended, the calls after two minutes would be canceled if no agent available at this time”, explains Thomas Wendt, Director of QuestNet Ltd. because of course the question arises, whether the caller now the free two minutes are more important than the chance after two minutes and a few seconds someone to achieved. Is the call attempt is canceled again after two minutes, then it can be very tedious are actually to reach a contact person.

These costs for the caller in the form of additional latency by many call attempts should not be underestimated. Make matters worse especially for the company, that it is still unclear what the final solution should look like after the planned transitional period.” The Association of providers of telecommunications and value-added services is also skeptical concerning the practical implementation of the new regulation. He also sees pitfalls, which could mean a deterioration of customer service through the free queue in the recently adopted draft. On the subject of queues we see, yet significant changes might be needed, to achieve that overpriced and long queues can be prevented by so-called black sheep”explains Jurgen Grutzner, Managing Director of the VATM. The VATM here among other things, the introduction of a certificate for call centers in the discussion, has introduced the short and thus particularly economical Queues, as well as a consumer-friendly service would promote. “Garcia continued: In the course of the deliberations in the Bundesrat and Bundestag should be sought more seriously after a possible economically sensible solution with maximum consumer benefits.” About QuestNet GmbH: The QuestNet GmbH is an application service provider, focusing on the development and indirect marketing innovative phone value-added services in combination with international service numbers.

Then revealed himself for the German domestic market supply in 2010 an increase of over 5 percent. In the segments the bedding and especially the wallpaper and wallcoverings jutted out still. Wallpaper and wall coverings are booming currently in the end customers as well as in the object store. This segment of still stable demand enjoyed even during the economic crisis. The social and economic development of in recent years without a trace over went also to the consumer of the furnishing sector. This was at least the tenor of this year’s fair in Frankfurt.

Many consumers have now an ethical self-image”and very specific requirements” of quality and service. And they want to not drop it even in financially difficult times. The new consumption landscape, as she was in Frankfurt to admire, is characterized by quality, durability, sustainability and relevance. Meanwhile, a new generation of designers is dealt intensively with the trends such as harking back to “” Essence and tradition”, utility invites you to use” or back to the origins of sustainability through green ‘textiles’. Even almost forgotten crafts are revived. The three-stage supply chain standard used in most industries up to the consumer, production/import middlemen retail consumer, now as in so many industries also in the home and home textile industry no longer existent.

The room specialist assumes wholesale functions by purchasing cooperatives like South federal purchasing Association for home textiles today with its very high degree of cooperation, intercolor KATAG, FHR trade ring, decor-Union, beds ring, Wotex, WHB, COPA, 2HK etc. So the market power is clearly now the trade. Approximately 43 percent of House and home textiles volume of 9.14 billion to consumers today deposed through retailers are room dealers, retailers and the furniture retailer. Second strongest sales track the purchase department stores and shipper, however with a market share of less than 30 percent. About 10 percent the space equipment craft/projectors. The other distribution channels including retail stores remain, after all, still over 18 percent. IBH Cologne leads in the new industry sectors former marketing employee of Dr. Vossen at the BBE in Cologne as a highly experienced author team cooperate here everything around the topic of House and home textiles. There are not only the goods groups bedding, textile floor coverings and curtains/decoration materials of a detailed analysis subjected to, but also created a long-term forecast for the main distribution channels.