now gaining popularity and becoming one of the most important types of work in construction and reconstruction of houses, buildings. Thermal insulation of facades of modern high-quality insulating materials will significantly reduce heating costs in winter and cool in summer. Thermal insulation of facades will also protect the building from the effects of rainfall and extremes of temperature, and will significantly increase the service life. and Of course, using a variety of finishing materials you will add a beautiful aesthetic home. It is very important to work on warming facades were made qualitatively, otherwise you will find vymokanie wall formation cold bridges and fungal coating.
And this in turn entails the destruction of the insulation, degradation of the wall. Most technologies facade insulation came from Switzerland, Sweden and Germany. As insulation used polystyrene foam, and later he was to be replaced by slabs of basalt mineral and stone wool, extruded polystyrene. It is now possible to allocate 3 most popular systems warming. 1) Thermal insulation of building facades with kolodtsevoy brickwork and three-layer system. In this case, the insulation between itself have a bearing wall and an outer layer of bricks. This exterior insulation system is inexpensive to device, but a constructive solution, frankly, is far from perfect and has such a drawback, as the formation of condensation inside the structure, if you use as insulation foam board. And all because Polystyrene is an excellent vapor barrier, having a low vapor permeability coefficient equal to 0.05 mg / (m h Pa), and all the moisture coming out of the room will accumulate between them and the inner wall. This will lead to premature wear of the insulation, besides his love rodents.