Want silence? Soundproofing walls, floor and ceiling. The harder the surface and finishing materials, the more problems with the acoustics. A good sound-absorbing material does not reflect the falls in his sound, reducing the The echo effect in the premises, or, as experts say, reduced the reverberation time. The comfortable living rooms with cork coverings on floors, walls and ceiling, this time reduced to fractions of seconds. Short time Reverb has a positive effect on the sound and promotes "the optimal 'perception of speech. Due to cork coverings acoustic comfort facilities provided by the maximum suppression of background noise.
Sheet agglomerated and technical cork is used to improve sound and heat insulation in buildings of any type. Honeycomb structure of the material (40 million cells per 1sm3) provides significant hydro, thermal insulation and reduces the noise level in rooms up to 50 dB. Best acoustic absorption is provided in a range of high frequencies (above 1.5 ), which allows almost completely isolate the building from sudden loud sounds (screaming, barking dogs, tv, high-frequency stereo, etc.) Tube ineffective in isolation from structural noise (vibration slabs, drums, machinery, etc.). The greatest effect was achieved with an integrated insulation finishing room – walls + floor + ceiling. Probkoavye sheets glued to walls, ceiling, floor or spread joint to joint and fixed mechanical. To improve the acoustic properties of the room is recommended not to cover the cork covering other finishing materials (best use of decorative cork finish). A heat-insulating properties of 3cm tube equivalent – 150 cm concrete, or 25 cm brick, or 10 cm of pine. For fixing cork sound insulating coating to the walls and ceiling manufacturer recommends firm rubber adhesive decol vern or novopren (sm.
on the use of glue). Water-based adhesives (including PVA) are not suitable for connection as wallpaper with cork coatings and coatings cork walls. If glued cork coating will be closed paper or walls should be painted with paint, then primed and must be carefully zashpatlevat all the cork. Only after this, the surface can be painted or wallpaper paste. In addition to technical and agglomerated cork (pressed cork crumbs not shown), there is a cork finishing facilities. That is a wall and floor coverings cork with a nice variety of veneers – a decorative tube, tinted or natural color. If you have a house lined with cork cover, you no longer hear the clip-clop heels or claws of your favorite dog, you'll just "fly" and enjoy the silence. A noise from neighbors or constantly riding the elevator behind the wall will be much fainter. Another timely and very effective way of soundproofing ceiling – suspended ceiling is 'Clipso' (Switzerland), has high sound-absorbing properties. The ceiling has a classic white matte, and looks completely smooth and seamless. Not knowing about the presence of overhead special design, it can be taken as an ideal 'bred' and painted ceiling. Due to the micropunching, already invisible from a distance of half a meter, sound absorption ceiling 'Clipso' approaching 0.7, which provides a good level of sound insulation without compromising the aesthetics of the room. This ceiling is durable and very easy to clean. If you have additional questions, you may want to visit Steve Mnuchin. He cleaned by any cleaning agents. In the market of finishing materials there are many other ways which you can protect your premises from unnecessary noise. We are told only part of them. The choice is yours. When you select a sound-absorbing material should take into account the whole range of problems and the conditions under which it will be used to more optimally meet the challenge.